Engel ENG165W 158 Litre Ice Box
570 X 1200 X 480 MM
Engel, the original high-performance cooler, is roto-molded for toughness and durability. It’s filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape.
Features:
Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
Built for Toughness and Durability:
SingleForm HardShell - Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation - With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket™ - Unlike the rubber gaskets used by our competitors, Engel’s all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape
Unity Latch System - Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener
Additional Technology:
TruHold Lid - Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads – easy to apply, easy to clean
I-BEAM Lid Inserts - Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet - Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge - Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes - Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug - Recessed one-twist opening drain plug with lanyard hole
Specifications:
Weight: 25.0 kg
Warranty: 10 Year Warranty on the Ice Box main body (cabinet)
NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods
570 X 1200 X 480 MM
Engel, the original high-performance cooler, is roto-molded for toughness and durability. It’s filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape.
Features:
Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
Built for Toughness and Durability:
SingleForm HardShell - Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation - With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket™ - Unlike the rubber gaskets used by our competitors, Engel’s all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape
Unity Latch System - Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener
Additional Technology:
TruHold Lid - Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads – easy to apply, easy to clean
I-BEAM Lid Inserts - Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet - Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge - Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes - Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug - Recessed one-twist opening drain plug with lanyard hole
Specifications:
Weight: 25.0 kg
Warranty: 10 Year Warranty on the Ice Box main body (cabinet)
NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods
Description
Engel ENG165W 158 Litre Ice Box
570 X 1200 X 480 MM
Engel, the original high-performance cooler, is roto-molded for toughness and durability. It’s filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape.
Features:
Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
Built for Toughness and Durability:
SingleForm HardShell - Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation - With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket™ - Unlike the rubber gaskets used by our competitors, Engel’s all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape
Unity Latch System - Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener
Additional Technology:
TruHold Lid - Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads – easy to apply, easy to clean
I-BEAM Lid Inserts - Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet - Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge - Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes - Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug - Recessed one-twist opening drain plug with lanyard hole
Specifications:
Weight: 25.0 kg
Warranty: 10 Year Warranty on the Ice Box main body (cabinet)
NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods
570 X 1200 X 480 MM
Engel, the original high-performance cooler, is roto-molded for toughness and durability. It’s filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape.
Features:
Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
Built for Toughness and Durability:
SingleForm HardShell - Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation - With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket™ - Unlike the rubber gaskets used by our competitors, Engel’s all silicone gaskets create a near airtight seal that is durable and will never lose it’s shape
Unity Latch System - Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener
Additional Technology:
TruHold Lid - Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads – easy to apply, easy to clean
I-BEAM Lid Inserts - Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet - Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge - Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes - Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug - Recessed one-twist opening drain plug with lanyard hole
Specifications:
Weight: 25.0 kg
Warranty: 10 Year Warranty on the Ice Box main body (cabinet)
NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods